VDO Sceptron/Fatron/Dotron Rigging Accessories

VDO Sceptron/Fatron Sliding Bracket

  • Slides into back-profile of VDO Sceptron or VDO Fatron at any position
  • Features 13mm hole to fit standard clamps or half couplers with M12 or 1/2“ bolt
  • Sold in sets of 10 (P/N 91610123)

Low Profile VDO Sceptron/Fatron Half Coupler

  • Half Coupler with M6 bolt and nut which slides directly into back-profile of VDO Sceptron or VDO Fatron at any position
  • Offers a reduced distance between fixture and truss (compared to the sliding bracket + standard clamp solution)
  • Sold per piece (P/N 91611790)

 

 

VDO Dotron Half Coupler

  • Half Coupler mounted on backside of VDO Dotron using included screws
  • Sold per piece (P/N 91611802)

VDO Sceptron/Fatron Linear Coupler

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into position using screws
  • Couples two or more fixtures together, enabling long vertical or horizontal lines with few supporting points
  • Sold per piece (P/N 91611843)

 

 

VDO Sceptron/Fatron Linear Aligner

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into positon using thumbscrews or regular screws (supplied)
  • Guarantees perfect alignment between adjacent fixtures
  • Sold in sets of 10 (P/N 91610124)

VDO Sceptron/Fatron Parallel Coupler

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into positon using thumbscrews
  • Supports fixtures at 30 / 40 / 50 / 60 / 70 / 80mm parallel center-to-center spacing (for VDO Fatron only the 80mm spacing can be used)
  • Sold in sets of 10 (P/N 91610125 for 30/40/50mm spacing & P/N 91610138 for 60/70/80mm spacing)
 

 

 

VDO Sceptron Pivot Coupler

  • Slides into back-profile of VDO Sceptron and is locked into position using screws
  • Can be locked at angles of 0 / 15 / 30 / 45 / 60 / 75 / 90 / 105 / 120 / 135 / 150 / 165 / 180 degrees
  • Allows fixtures to be built into triangles, squares, hexagons, …
  • Sold per piece (P/N 91611793)
 

VDO Sceptron/Fatron Pivot Coupler with VDO Dotron Attachment

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into position using screws
  • Can be locked at angles of 30 / 45 / 60 / 75 / 90 / 105 / 120 / 135 / 150 / 165 / 180 degrees
  • VDO Dotron can be installed “on” the corner using included screws
  • Allows fixtures to be built into triangles, squares, hexagons, …
  • Sold per piece (P/N 91616072)
 

 

 

VDO Dotron to VDO Sceptron/Fatron Coupler

  • Mounted on backside of VDO Dotron using included screws
  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into position using screws
  • Allows VDO Dotron to hang from end or side of VDO Sceptron or VDO Fatron
  • Sold per piece (P/N 91616071)
 
 

VDO Fatron Curving Coupler

  • Slides into back-profile of VDO Fatron and is locked into position using screws
  • Allows VDO Fatrons to be joined in a curved surface (up to 60 degrees between two fixtures)
  • Sold per piece (P/N 91610164)

 

 

VDO Dotron Flange Bracket

  • Mounting Plate mounted on backside of VDO Dotron using included screws
  • Allows VDO Dotron to be mounted on a surface
  • Features two 6,50mm holes for mounting onto wall or other surface
  • Sold per piece (P/N 91611803)

VDO Sceptron/Fatron Spigot Adapter 28mm

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into position using screws
  • Enables fitting to standard accessories such as floorplates
  • Sold per piece (P/N 91611791)

 

 

VDO Sceptron/Fatron Floorstand

  • Slides into back-profile of VDO Sceptron or VDO Fatron and is locked into position using screws
  • Can be mounted across two fixtures to create a continuous line
  • Enables floor-mounting of fixtures with angle-adjustment
  • Enables wall-mounting of fixtures with angle-adjustment
  • Features two 6,00mm holes for mounting onto wall or other surface
  • Sold per pair (P/N 91611792)

VDO Dotron MultiRig Bar 1000mm

  • VDO Dotrons can be mounted to this profile using included screws
  • Mounting holes allow 3-way, 4-way, 5-way, 6-way or 8-way configurations
  • All cables between the VDO Dotrons can be hidden inside the profile
  • Backside of profile fits all VDO Sceptron/Fatron accessories (Sliding Bracket, Low Profile Half Coupler, Linear Coupler, Spigot Adapter & Pivot Coupler)
  • Sold per piece (P/N 91616100)